subject
Engineering, 03.04.2020 16:16 lovwhydontwe

A plane area has its centroid C at point (2 cm, 4 cm). If the area of the plane is 100 cm2 and the moment of inertia, Iy is 2000 cm4, what is the centroidal moment of inertia, (Iy)Ca. 800cm4b. 1000cm4c. 1200cm4 d. 1600cm4

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
A plane area has its centroid C at point (2 cm, 4 cm). If the area of the plane is 100 cm2 and the m...
Questions
question
Mathematics, 12.11.2019 18:31
question
History, 12.11.2019 18:31
question
English, 12.11.2019 18:31
question
Social Studies, 12.11.2019 18:31