Engineering, 03.04.2020 01:25 jtgarner402

Os agentes inteligentes organizam o que coletam em alguma estrutura que lhes permita encontrar o subconjunto de dados necessários para determinada decisão em um momento qualquer do tempo. O fato é que essa estrutura tende a crescer e deve ser percorrida de alguma forma eficiente para que o agente seja efetivo em sua ação. Os métodos de busca presentes nos agentes inteligentes para a realização dessas tarefas são
a) centrais sendo o objetivo principal de um agente inteligente. b) aleatórios, gerando resultados ao acaso. c) criptografados, gerando resultados indecifráveis. d) subjacentes, sendo uma ferramenta importante à disposição do agente. e) opcional, podendo ou não existir de acordo com as ações tomadas pelo agente.
RESPOSTA LETRA D

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3

Answers: 2

Answer

Engineering, 06.07.2019 04:10

Aheat pump that operates on the ideal vapor compression cycle with refrigerant-134a is used to heat water from 15°c to 45°c at a rate of 0.12 kg/s. the condenser and evaporator pressures are 1.4 and 0.32 mpa, respectively determine: (a) the power input to the heat pump

Answers: 1

Answer

You know the right answer?

Os agentes inteligentes organizam o que coletam em alguma estrutura que lhes permita encontrar o sub...

Questions