Engineering, 31.03.2020 15:15 kakalli9999

Consider a sequential circuit that implements the following function in a self-driving car. Every second, the car's position within the lane is determined with cameras and fed as input to the sequential circuit. Accordingly, the car's steering wheel is moved to one of 2 positions: Left, Right. The car's position can be "Middle of a lane", "Drifting to the right edge of the lane", and "Drifting to the left edge of the lane". If the car is in the "Middle", the steering position is left unchanged. If the car is drifting to one of the edges of the lane, the steering is moved away from the edge, i. e., steering should be moved right if the car is near the left edge of the lane.
a. What are the states for the circuit controlling the steering?
b. What are the inputs to the circuit and what values can those inputs have?
c. Draw the finite state table and finite state diagram for this circuit.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window

Answers: 3

Answer

You know the right answer?

Consider a sequential circuit that implements the following function in a self-driving car. Every se...

Questions