Engineering, 31.03.2020 00:13 jazmineeverett1
A portion of the steam passing through a steam turbine is sometimes removed and used in a feedwater heater. The turbine losses 860 kW of heat to the surroundings with steam entering at 12.5 MPa and 550 °C at a rate of 20 kg s-1. Steam is bled from the turbine at 1000 kPa and 200 °C at a mass flow rate of 1 kg s-1. The remaining steam exits at 100 kPa and 100 °C. What is the power output from the turbine
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
A portion of the steam passing through a steam turbine is sometimes removed and used in a feedwater...
Questions
Mathematics, 22.03.2021 20:00
Mathematics, 22.03.2021 20:00
Mathematics, 22.03.2021 20:00
Mathematics, 22.03.2021 20:00
Mathematics, 22.03.2021 20:00
Physics, 22.03.2021 20:00
Mathematics, 22.03.2021 20:00
