Engineering, 30.03.2020 22:40 Tamiahufflululu

A Pitot-static tube is mounted in a wind tunnel test section to measure the local static pressure of the flow. The static pressure port is connected to a pressure transducer outside of the test section through a flexible tubing. The output signal of the pressure transducer is connected to a laptop computer data acquisition system. If the barometer reading in the wind tunnel lab is 101,325 Pascal, and the pressure transducer reading obtained from the computer data acquisition display is 0.2432 psi, what is the static pressure measured by the Pitot static tube in the wind tunnel

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

You know the right answer?

A Pitot-static tube is mounted in a wind tunnel test section to measure the local static pressure of...

Questions