Engineering, 30.03.2020 21:04 67555savchenko
An MgO component must not fail when a tensile stress of 30 MPa is applied. Determine the maximum allowable surface crack length for a loading/geometry with geometric factor of 1.92 Assume the major axis of the elliptical flaw is normal to the tensile loading axis.
Answers: 2
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
An MgO component must not fail when a tensile stress of 30 MPa is applied. Determine the maximum all...
Mathematics, 22.05.2021 19:30
Mathematics, 22.05.2021 19:30
Chemistry, 22.05.2021 19:30
Biology, 22.05.2021 19:30
History, 22.05.2021 19:30
Mathematics, 22.05.2021 19:30