Steam enters a heat exchanger at a pressure of 1.5 bar and a temperature of 400°C with a mass flow rate of 0.05 kg/s and exits at a temperature of 120°C and at the same inlet pressure. The steam heat transfer takes place with refrigerant R22 in a separate stream. The refrigerant enters the heat exchanger as liquid at 4.5 bar and leaves at the same pressure and at a temperature of 10°C. The heat exchanger is not well designed and there is stray heat transfer to the surroundings equal to 10% of the heat transferred from the steam.

Determine

(a) The rate of stray heat transfer, in kW.

(b) The rate of heat transfer to the refrigerant, in kW

(c) The mass flow rate of the refrigerant, in kg/s

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

What precautions should you take to prevent injuries when dealing with heavy loads?

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above