subject
Engineering, 28.03.2020 02:44 auviannadority13

An office is occupied by 30 persons who each produce 200 Btu/h (58W) of sensible heat and 0.25 lb/h (0.1kg/h) of moisture. The office is to be maintained at 72F (22C) and 50 percent relative humidity. Conditioned air is supplied at 60F (15C) to meet the sensible and latent loads. What is the sensible heat ratio (SHR) to meet the loads

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
question
Engineering, 06.07.2019 03:10
Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window
Answers: 3
You know the right answer?
An office is occupied by 30 persons who each produce 200 Btu/h (58W) of sensible heat and 0.25 lb/h...
Questions
question
History, 13.10.2020 01:01
question
Mathematics, 13.10.2020 01:01