Engineering, 25.03.2020 06:29 rhiannonwheatcr4468

A crate with dimension 12 x 10 x 4in and a mass of 120 lbs slides on an inclined plane of dimension 80 x 10 x 3in. Answer the following questions:
1. Model the system in ADAMS without friction and compare your result with the analytical solution.
2. Model the system in ADAMS with friction coefficients, μs=0.4 and μd= 0.3 and find the minimum inclination that will ensure that a crate slides off an inclined plane. Find the value of the crate's constant acceleration. compare and verify your result with the analytical solution.
3. For the previous part, simulate the model for an end time of 0.5 seconds and plot the create acceleration vs. time. Show all the calculations and results clearly.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

Answer

You know the right answer?

A crate with dimension 12 x 10 x 4in and a mass of 120 lbs slides on an inclined plane of dimension...

Questions