subject
Engineering, 24.03.2020 05:35 alexis9658

Write a program that prompts for a line of text and then transforms the text based on chosen actions. Actions include reversing the text and converting the text to leet-speak. You may be able to imagine extending to other actions such as a pig-latin translator, or encoding or decoding a secret message. Turn in the version specified here before extending Welcome to the Text Converter Available Actions 1337) convert to 1337-speak rev) reverse the string quit) exit the progranm Please enter a string: Hello cs 200. Action (1337, rev, quit): rev 002 Sc olleH Action (1337, rev, quit): reverse again Unrecognized action. 002 Sc olleH Action (1337, rev, quit): rev ?? 11 CS 200. Action (1337, rev, quit): quit See you next time!

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
question
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
question
Engineering, 06.07.2019 03:20
What is the strain energy stored in a solid uniformly circular shaft of length 3.0 m and diameter 120 mm when subject to pure torsion if the maximum shear stress is 40 mpa? g-80gpa
Answers: 1
You know the right answer?
Write a program that prompts for a line of text and then transforms the text based on chosen actions...
Questions
question
Mathematics, 27.02.2021 04:30