Engineering, 23.03.2020 20:04 jason1702
Consider the flow past a 30-degree expansion corner. The upstream conditions are M1 = 2, P1 = 3 atm, and T1 = 400 K. Calculate the following downstream conditions: M2, P2, T2, T02, and P02.
Answers: 2
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Consider the flow past a 30-degree expansion corner. The upstream conditions are M1 = 2, P1 = 3 atm,...
Chemistry, 22.01.2021 04:00
Mathematics, 22.01.2021 04:00
Mathematics, 22.01.2021 04:00
Chemistry, 22.01.2021 04:00
Mathematics, 22.01.2021 04:00
Mathematics, 22.01.2021 04:00
Mathematics, 22.01.2021 04:00
Mathematics, 22.01.2021 04:00
Mathematics, 22.01.2021 04:00
Mathematics, 22.01.2021 04:00