subject
Engineering, 23.03.2020 18:57 williejaroid123

As described in "A Note About Bacterial Reproduction -- and the "Culture Bias,"" the organism Epulopisciumdoes not divide by binary fission. Rather, each cell increases in sizeand divides to produce multiple daughter cells that are held within the original cell well. After lysis, those daughters are released to repeat the process. Assuming Epulopisciumcould be grown in pure culture in the laboratory in broth and on solid media (it currently cannot), which method would be best for measuring the increase in biomass during growth?Select one:a. Turbidity readings from a spectrophotometer; the increase in biomass will directly vary with the turbidity of the culture.
b. The viable plate count; each colony derives from a single cell and the number of coloniesequals the number of cells. c. Direct microscopic count; the experimenter can directly count the number of cells and extrapolate to the biomass. d. Chemostat growth; it will prevent the culture from entering the death phase

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
As described in "A Note About Bacterial Reproduction -- and the "Culture Bias,"" the organism Epulop...
Questions
question
Biology, 26.02.2020 23:06