subject
Engineering, 22.03.2020 21:36 zachzach28280

Match the words with their definitions
- Load-bearing wall
- footings
- Microlam
- Gable
- Joist
- OSB
- Particleboard
- Pitch
- Point load
- Rebar
- Backfill

-Wooden 2 X 8's, 10's, or 12's that run parallel to one another and support a floor or ceiling, and supported in turn by larger beams, girders, or bearing walls.
- A point where a bearing/structural weight is concentrated and transferred to the foundation.
- Includes all exterior walls and any interior wall that is aligned above a support beam or girder
- Plywood substitute made of coarse sawdust that is mixed with resin and pressed into sheets.
- The replacement of excavated earth into a trench around or against a basement/crawl space foundation wall.
- Continuous 8m" or 10" thick concrete pad installed before and supports the foundation wall or monopost
- Ribbed steel bars installed in foundation concrete walls, footers and poured in place concrete structures designed to strengthen concrete.
- The end, upper, triangular area of a home, beneath the roof
- A manufactured 4X8 wood panel made out of 1-2 wood chips and glue. Often used as a substitute for plywood.
- The incline slope of a roof or the ratio of the total width of a house.
- A manufactured structual wood beam. It is constructed of pressure and adhesive wood strands of wood.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
You know the right answer?
Match the words with their definitions
- Load-bearing wall
- footings
- Microlam
Questions
question
Mathematics, 28.02.2020 20:47
question
English, 28.02.2020 20:48
question
Biology, 28.02.2020 20:48
question
Mathematics, 28.02.2020 20:48