Engineering, 20.03.2020 10:33 joseflores10205
A 75 mm diameter, 15 mm wide A80-M12V grinding wheel is used for traverse surface grinding of a 75 mm by 75 mm 1040 steel workpiece. The workpiece traverse speed is 1 mm/sec, the radial depth of grind is 1.5 mm, the (axial) intermittent cross-feed is 10 mm/stroke, and the wheel surface speed is 314 mm/sec. Estimate the required amount of grinding time (without spark-out) and the spindle power.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
A 75 mm diameter, 15 mm wide A80-M12V grinding wheel is used for traverse surface grinding of a 75 m...
Questions
Mathematics, 29.10.2019 01:31
History, 29.10.2019 01:31
Mathematics, 29.10.2019 01:31
Mathematics, 29.10.2019 01:31
Mathematics, 29.10.2019 01:31
Health, 29.10.2019 01:31
History, 29.10.2019 01:31
Mathematics, 29.10.2019 01:31
Mathematics, 29.10.2019 01:31
Computers and Technology, 29.10.2019 01:31
Computers and Technology, 29.10.2019 01:31
