Team enters a turbine operating at steady state at 2 MPa, 360°C with a velocity of 100 m/s. Saturated vapor exits at 0.1 MPa and a velocity of 50 m/s. The elevation of the inlet is 3 m higher than at the exit. The mass flow rate of the steam is 15 kg/s, and the power developed is 7 MW. Let g= 9.81 m/s2. Determine (a) the area at the inlet, in m2, and (b) the rate of heat transfer between the turbine and its surroundings, in kW

i mean i gues

explanation:

answer:

yes that is right have a good day

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.