= 
→ 1
→ 2![\frac{d T}{d t}=\frac{wc}{mc}\left[T_{i}-T\right]+\frac{h p A_ P}{m c} \quad(T_w-T)](/tpl/images/0552/3820/f6dd3.png)
![\frac{d T}{d t}=\frac{w}{m} \left[T_{i}-T\right]+\frac{h p A_ P}{m c} \quad(T_w-T)](/tpl/images/0552/3820/5cd25.png)
= 
![T(s)=\frac{\left[\frac{w cT_i+h_{P} A_ P T_{w}}{m c}\right]}{\left(\frac{h_ P A _P}{mc}+S+\frac{w}{m}\right)}](/tpl/images/0552/3820/a2940.png)
is the value of steady state.
→ 1
→ 2
= 
→3
→ 4
= 
+ 
→ 5
→ 6
+ 
- For a steam-heated stirred-tank system modeled by the following equations:
mC dT/dt = w...
Engineering, 18.03.2020 19:31 QueenNerdy889
For a steam-heated stirred-tank system modeled by the following equations:
mC dT/dt = wC(Tᵢ - T)+hₚ Aₚ (Tᵥᵥ - T)
mᵥᵥ Cᵥᵥ dT_w/dt = hₛ Aₛ (Tₛ - T_w) - hₚ Aₚ (Tᵥᵥ - T)
Assume that the system temperature Tₛ and is constant.
(a) Find a transfer function relating tank temperature T and inlet liquid Tᵢ.
(b) What is the steady-state value for this choice of input and output?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
Questions
English, 25.07.2019 02:00
English, 25.07.2019 02:00
Mathematics, 25.07.2019 02:00
Social Studies, 25.07.2019 02:00
Mathematics, 25.07.2019 02:00
Mathematics, 25.07.2019 02:00
Mathematics, 25.07.2019 02:00
