Engineering, 15.03.2020 11:23 sarinawhitaker

Apply it
Identify the machines in your
school workshop that have
a pulley system as the drive
mechanism. What are the
advantages of using pulleys?
How can different speeds be
achieved?

Answers: 3

Show answers

Answers

To indentify the machines in our school that have a pulley system as the drive mechanism and the advantages of Pulley system is given below

Explanation:

1.A pulley is a wheel with a groove along its edge, that holds a rope or cable. ... When pulleys are used together in this way, they reduce the amount of force needed to lift a load. A crane uses pulleys to help it lift heavy loads. Pulleys are one of the six simple machines.

2.Examples of pulleys include:

Elevators use multiple pulleys in order to function. A cargo lift system that allows for items to be hoisted to higher floors is a pulley system. Wells use the pulley system to hoist the bucket out of the well. Many types of exercise equipment use pulleys in order to function.

3.Using multiple pulleys decreases the amount of force necessary to move an object by increasing the amount of rope used to raise the object. The mechanical advantage (MA) of a pulley system is equal to the number of ropes supporting the movable load.

4.To calculate the mechanical advantage of a pulley you simply have to count the number of rope sections that support whatever object you are lifting (not counting the rope that is attached to the effort). For example, in a one pulley system the MA is 1. ... Therefore your mechanical advantage would be 2 (600/300).

5.The movable pulley is used to reduce the amount of input force to lift a load. The most popular system that uses this pulley would be a well. Unlike the fixed pulley, the movable pulley is attached to the load, and is lifted by pulling up on the rope, making it twice as easier to lift a heavy object.

6.The main benefit of the pulley is that it can actually reduce the amount of force which is required to lift heavy objects and redistributes the direction of the force to lift heavy objects

Answer from: Quest

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

Answer from: Quest

answer:

put more,

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

Answer

You know the right answer?

Apply it
Identify the machines in your
school workshop that have
a pulley system a...

Questions