subject
Engineering, 14.03.2020 04:13 CheddaDsk

A water turbine is to be designed to produce 27 MW when running at 95 rpm under a head of 16.5m. A model turbine with an output of 37.5 kW is to be tested under dynamically similar conditions with a head of 4.9 m.(a) Calculate the model speed and scale ratio.(b) Assuming a model efficiency of 88%, estimate the volume flow rate through the model.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
A water turbine is to be designed to produce 27 MW when running at 95 rpm under a head of 16.5m. A m...
Questions
question
Mathematics, 27.03.2021 07:10
question
Mathematics, 27.03.2021 07:10
question
Mathematics, 27.03.2021 07:10
question
Geography, 27.03.2021 07:20
question
Mathematics, 27.03.2021 07:20
question
Mathematics, 27.03.2021 07:20
question
Mathematics, 27.03.2021 07:20