subject
Engineering, 13.03.2020 03:28 zahrast14

A stainless steel rod with a circular cross section hasa length of 100 mm and a diameter of 2.0 mm. It is deformed elastically in compression by a force of 500 N applied parallel to its length. The material has a Young’s modulus of 200 GPa, and a shear modulus of 77 GPa. Calculate (i) the amount by which the rod will decrease in length, and (ii) the amount by which the rod will increase in diameter.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
A stainless steel rod with a circular cross section hasa length of 100 mm and a diameter of 2.0 mm....
Questions
question
Physics, 02.03.2020 09:57
question
Physics, 02.03.2020 09:58
question
Biology, 02.03.2020 09:59
question
History, 02.03.2020 10:02