subject
Engineering, 12.03.2020 22:39 HotWheels162000

A lawn mower component experiences critical static stresses of sx = 45,000 psi, sy = 25,000 psi, and txy = 15,000 psi. The component is made of 4130 normalized steel that has an ultimate strength of 97,000 psi and a yield strength of 63,300 psi. Determine the factor of safety based on predicting failure by the maximum-normalstress theory, the maximum-shear-stress theory, and the distortion energy theory

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
question
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
A lawn mower component experiences critical static stresses of sx = 45,000 psi, sy = 25,000 psi, and...
Questions
question
Mathematics, 21.01.2021 03:30
question
Mathematics, 21.01.2021 03:30
question
Mathematics, 21.01.2021 03:30
question
Mathematics, 21.01.2021 03:30
question
Mathematics, 21.01.2021 03:30
question
Spanish, 21.01.2021 03:30