subject
Engineering, 12.03.2020 17:35 makaylamsikahema

For the transfer function given by

T(s) = 14.145/[(s2+0.842s+ 2.829)(s +5)]

a. Find the percent overshoot, settling time, rise time and peak time.
b. Verify the answers you obtained in part (a) numerically using Matlab (Hint: Use STEP command to simulate the step response of T(s), and then extract the specifications using STEPINFO command).

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
For the transfer function given by

T(s) = 14.145/[(s2+0.842s+ 2.829)(s +5)]

...
Questions
question
Mathematics, 22.07.2021 05:00
question
Mathematics, 22.07.2021 05:00
question
Business, 22.07.2021 05:00