Engineering, 12.03.2020 05:58 needhelpwithHW10

For some metal alloy, a true stress of 345 MPa (50040 psi) produces a plastic true strain of 0.02. How much will a specimen of this material elongate when a true stress of 411 MPa (59610 psi) is applied if the original length is 470 mm (18.50 in.)

Answers: 1

Show answers

Answers

Answer from: jennychen2518pbmirn

Complete Question

For some metal alloy, a true stress of 345 MPa (50040 psi) produces a plastic true strain of 0.02. How much will a specimen of this material elongate when a true stress of 411 MPa (59610 psi) is applied if the original length is 470 mm (18.50 in.)?Assume a value of 0.22 for the strain-hardening exponent, n.

The elongation is =21.29mm

Explanation:

In order to gain a good understanding of this solution let define some terms

True Stress

A true stress can be defined as the quotient obtained when instantaneous applied load is divided by instantaneous cross-sectional area of a material it can be denoted as $\sigma_T$ .

True Strain

A true strain can be defined as the value obtained when the natural logarithm quotient of instantaneous gauge length divided by original gauge length of a material is being bend out of shape by a uni-axial force. it can be denoted as $\epsilon_T$ .

The mathematical relation between stress to strain on the plastic region of deformation is

$\sigma _T =K\epsilon^n_T$

Where K is a constant

n is known as the strain hardening exponent

This constant K can be obtained as follows

$K = \frac{\sigma_T}{(\epsilon_T)^n}$

No substituting $345MPa \ for \ \sigma_T, \ 0.02 \ for \ \epsilon_T , \ and \ 0.22 \ for \ n$ from the question we have

$K = \frac{345}{(0.02)^{0.22}}$

= 815.82MPa

Making $\epsilon_T$ the subject from the equation above

$\epsilon_T = (\frac{\sigma_T}{K} )^{\frac{1}{n} }$

$Substituting \ 411MPa \ for \ \sigma_T \ 815.82MPa \ for \ K \ and \ 0.22 \ for \ n$

$\epsilon_T = (\frac{411MPa}{815.82MPa} )^{\frac{1}{0.22} }$

=0.0443

From the definition we mentioned instantaneous length and this can be obtained mathematically as follows

$l_i = l_o e^{\epsilon_T}$

Where

l_i is the instantaneous length

l_o is the original length

$Substituting \ 470mm \ for \ l_o \ and \ 0.0443 \ for \ \epsilon_T$

$l_i = 470 * e^{0.0443}$

=491.28mm

We can also obtain the elongated length mathematically as follows

$Elongated \ Length =l_i - l_o$

$Substituting \ 470mm \ for l_o and \ 491.28 \ for \ l_i$

$Elongated \ Length = 491.28 - 470$

=21.29mm

Answer from: Quest

answer: eco and eco system

explanation:

Answer from: Quest

Jkdjebekhrowhrvwkjrir is the season for the

Another question on Engineering

Engineering, 04.07.2019 16:10

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

You know the right answer?

For some metal alloy, a true stress of 345 MPa (50040 psi) produces a plastic true strain of 0.02. H...

Questions