Engineering, 12.03.2020 03:37 ayoismeisalex
Combustion of Solid Fuel. A fuel analyzes 74.0 wt % C and 12.0% ash (inert). Air is added to burn the fuel, producing a flue gas of 12.4% CO2, 1.2% CO, 5.7% O2, and 80.7% N2. Calculate the kg of fuel used for 100 kg mol of outlet flue gas and the kg mol of air used
Answers: 1
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
Combustion of Solid Fuel. A fuel analyzes 74.0 wt % C and 12.0% ash (inert). Air is added to burn th...
Mathematics, 01.02.2021 06:20
Mathematics, 01.02.2021 06:20
Mathematics, 01.02.2021 06:20
History, 01.02.2021 06:20
Mathematics, 01.02.2021 06:20
Medicine, 01.02.2021 06:20
History, 01.02.2021 06:20
English, 01.02.2021 06:20
History, 01.02.2021 06:20