Engineering, 12.03.2020 03:29 levon15

At the inlet to the combustor of a supersonic combustion ramjet (or scramjet), the flow Mach number is supersonic. For a fuel-air mass ratio of .03 and a combustor exit temperature of 4800 degr, calculate the inlet Mach number above which the flow will be unchoked. Assume one- dimensional frictionless flow with y = 1.4, with heat release per slug of fuel equal to 4.5 x 108 ft-lbf. (Anderson 3.11) The temperatures for the above combustion problems are pretty high. A more representative value of the heat capacity ratio for products of combustion at these temperatures is y = 1.28 The value of the specific gas constant R may still be approximated as equal to that of air. b) For problem #2, calculate the inlet Mach number above which the flow will be unchoked, based on y = 1.28

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

You know the right answer?

At the inlet to the combustor of a supersonic combustion ramjet (or scramjet), the flow Mach number...

Questions