Engineering, 12.03.2020 01:52 amanda289
A cylindrical metal specimen having an original diameter of 12.8 mm and gauge length of 50.80 mm is pulled in tension until fracture occurs. The diameter at the point of fracture is 6.60 mm (0.260 in.), and the fractured gauge length is 72.14 mm. Calculate the ductility in terms of percent reduction in area and percent elongation.
Answers: 1
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
A cylindrical metal specimen having an original diameter of 12.8 mm and gauge length of 50.80 mm is...
English, 10.03.2021 02:10
Mathematics, 10.03.2021 02:10
Mathematics, 10.03.2021 02:10
Health, 10.03.2021 02:10
English, 10.03.2021 02:10
English, 10.03.2021 02:10
Mathematics, 10.03.2021 02:10
Mathematics, 10.03.2021 02:10
History, 10.03.2021 02:10
Biology, 10.03.2021 02:10
Mathematics, 10.03.2021 02:10