5.You are designing the fit for two bearings. For each case, specify the maximum and minimum hole and shaft diameter:a. A journal bearing and bushing with basic size is 1.25 in that requires a close running fit. b.A ball bearing assembly with basic size 35 mm that requires a locational interference fit.

What precautions should you take to prevent injuries when dealing with heavy loads?

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.