A pump takes water from the bottom of a large tank where the pressure is 50 psi and delivers it through a hose to a nozzle that is 50ft above the bottom of the tank at a rate of 100 ibm/s. the water exits the nozzle into the atmosphere at a velocity of 70ft/s. if a 10hp motor is required to drive the pump which is 75% efficient, find:the friction loss in the pump

What are the major differences between injection molding and extrusion?

Not a characteristic property of ceramic material (a) high temperature stability (b) high mechanical strength (c) low elongation (d) low hardness

The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40°c and an evaporating temperature of -4°c shows a refrigeration capacity of 115 kw. at this operating point, the motor (its efficiency is 90 percent) draws 34.5 kw. the bore of the cylinders is 87 mm and the piston stroke is 70 mm. the performance data are based on 8°c of sub-cooling of the liquid leaving the condenser. compute (a) the actual volumetric efficiency and (b) the compression efficiency.