Engineering, 07.03.2020 03:07 Pomskis2341
You are investigating surface hardening in iron using nitrogen gas. Two 5 mm thick slabs of iron are separately exposed to nitrogen environments at 850°C and 950°C, respectively. Both situations have achieved a steady-state diffusion condition. The concentration of nitrogen at the higher pressure surface at each temperature is 4 kg/m3 . What is the concentration of nitrogen on the lower pressure surface of each slab slab given that the diffusion flux is 9.0 x 10 -8 kg/(m2 *s)?
Answers: 3
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
You are investigating surface hardening in iron using nitrogen gas. Two 5 mm thick slabs of iron are...
Mathematics, 18.03.2020 18:32
Mathematics, 18.03.2020 18:32
Mathematics, 18.03.2020 18:32
Social Studies, 18.03.2020 18:32
Mathematics, 18.03.2020 18:32
Mathematics, 18.03.2020 18:32
History, 18.03.2020 18:32
Mathematics, 18.03.2020 18:32