subject
Engineering, 07.03.2020 00:00 jholland03

There are two concentric conducting spherical shells with a dielectric between them. Their radii are 0.1 m and 0.2 m. There is a voltage between the two spheres such that the surface of the r = 0.1 m shell has a surface free charge density of p_sf =5 times l0^-8 C/m^2. On the surface of the dielectric adjacent to the r = 0.1 m conducting shell is a surface bound charge density of p_sb=-2 times 10^-8 C/m^2. Find E, D, and P throughout the dielectric. What is the dielectric constant of the dielectric?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
You know the right answer?
There are two concentric conducting spherical shells with a dielectric between them. Their radii are...
Questions
question
English, 21.02.2021 01:00