subject
Engineering, 06.03.2020 05:08 105001038

One-dimensional plane wall of thickness 2L=80 mm experiences uniform thermal generation of q dot =1000 W/m^3 and is convectively cooled at x=±40m by an ambient fluid characterized by T [infinity] = 30 degrees C. If the steady-state temperature distribution within the wall is T(x) = a(L2-x2)+b where a = 15o C/m^2 and b=40oC, what is the thermal conductivityof the wall? What is the value of the convection heat transfer coefficient?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
One-dimensional plane wall of thickness 2L=80 mm experiences uniform thermal generation of q dot =10...
Questions
question
Mathematics, 02.02.2021 01:00
question
Mathematics, 02.02.2021 01:00
question
Mathematics, 02.02.2021 01:00
question
Mathematics, 02.02.2021 01:00