Engineering, 04.03.2020 17:13 kiiya33

Logical variables: Running late? Complete the tunction RunningLate such that the logical variable on Time is true if no Traffic is true and gasEmpty is false. Ex >> n°Traffic = true ; >> gasEmpty-false; >onTime - Runninglate(noTraffic, gasEmpty) logical Your Function B Save C Reset EE MATLAB Documentation 1 function onTime - RunningLate (noTraffic, gasEmpty) 2 % complete the logical expression to the right of . using the variables n°Traffic and gasEmpty 4 onTime - 6 end Code to call your function C Reset 1 noTraffic true; gasEmpty true; 2 onTime-Runninglate(noTraffic, gasEmpty)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 19:20

In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?

Answers: 1

Answer

You know the right answer?

Logical variables: Running late? Complete the tunction RunningLate such that the logical variable on...

Questions