Engineering, 27.02.2020 19:26 drey10

Fluid originally flows through a tube at a rate of 100 cm^3/s. To illustrate the sensitivity of the Poiseuille flow rate to various factors, calculate the new flow rate for the following changes with all other factors remaining the same as in the original conditions:

a. Another tube is used with a radius 0.100 times the original.
b. Pressure difference increases by a factor of 1.60.
c. A new fluid with 3.00 times greater viscosity is substituted.
d. The tube is replaced by one having 4.00 times the length.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

You know the right answer?

Fluid originally flows through a tube at a rate of 100 cm^3/s. To illustrate the sensitivity of the...

Questions