subject
Engineering, 26.02.2020 05:45 carladasie

2. One of the many methods used for drying air is to cool the air below the dew point so that condensation or freezing of the moisture takes place. To what temperature must atmospheric air be cooled in order to have humidity ratio of 0.005 lb/lb?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 06.07.2019 03:20
What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.
Answers: 3
question
Engineering, 06.07.2019 04:20
Steam enters a turbine at steady state at 2 mpa, 360°c with a velocity of 100 m/s. saturated vapor exits at 0.1 mpa and a velocity of 50 m/s. the elevation of the inlet is 3 m higher than at the exit. the mass flow rate of the steam is 15 kg/s, and the power developed is 7 mw. let g 9.81 m/s^2. determine: a)-the area at the inlet, in m^2 b)-the rate of heat transfer between the turbine and surroundings, in kw c)-draw a p-v diagram for this process.
Answers: 1
question
Engineering, 06.07.2019 05:10
Does the hardness of a sheet metal have an effect on its springback in bending? explain.
Answers: 1
question
Engineering, 06.07.2019 05:10
Determine the heat loss per hour from a wall of a build- ing when the wind is blowing parallel to its surface with a speed of 2 km/hour. the wall is 5 metre long and 3 metre high. tempe rature of the wall is 25°c and air temperature is 5°c.
Answers: 2
You know the right answer?
2. One of the many methods used for drying air is to cool the air below the dew point so that conden...
Questions
question
Mathematics, 10.10.2020 14:01
question
Mathematics, 10.10.2020 14:01
question
Mathematics, 10.10.2020 14:01
question
Arts, 10.10.2020 14:01