subject
Engineering, 26.02.2020 04:58 Aestheticblue

A crack has been discovered along the edge of a reinforcing rib in a titaniumhousing. The rib is 0.5 inches thick and 4.0 inches wide. The crack extends completely through the thickness and is about 1.20 inches long.

If the housing is subjected to static loading only, and the maximum estimated loading produces a tensile load along the rib axis of 50,000 Ib, should the housing be removed from service? The housing material exhibits a yield strength of 150 ksi and a plane strain fracture toughness of 50 ksi in^1/2

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
A crack has been discovered along the edge of a reinforcing rib in a titaniumhousing. The rib is 0.5...
Questions
question
Mathematics, 11.07.2019 02:50
question
Mathematics, 11.07.2019 02:50