subject
Engineering, 26.02.2020 01:01 Heyitsbrandi

. After all of the data has been read, print (i. e., print) the address of the person with the highest number of messages, along with the number of messages of that person. To do this, create a list of tuples (count, email) from the dictionary, sort the list in reverse order and print out the person who has the highest number of messages

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
. After all of the data has been read, print (i. e., print) the address of the person with the highe...
Questions
question
Mathematics, 22.07.2020 01:01
question
Mathematics, 22.07.2020 01:01
question
Mathematics, 22.07.2020 01:01
question
Mathematics, 22.07.2020 01:01
question
Biology, 22.07.2020 01:01
question
Mathematics, 22.07.2020 01:01
question
Mathematics, 22.07.2020 01:01