Engineering, 25.02.2020 03:42 hopelesslylost13
A sealed adiabatic piston/cylinder system is used to compress nitrogen gas (γ = 1.4, ¯m = 28.0 kg/kmol) from T1 = 300 K and p1 = 1.0 bar to a final pressure of p2 = 10 bar. Assume a calorically perfect gas over the temperature range of interest. (a) What is the minimum amount of specific work (wₘᵢₙ) required to achieve this compression? (b) The measured final temperature is T2 = 590 K. If the efficiency is defined as: η = wₘᵢₙ / wₐₜᵤₐₗ , what is the efficiency of this compression process?
Answers: 2
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20
Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms
Answers: 2
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
A sealed adiabatic piston/cylinder system is used to compress nitrogen gas (γ = 1.4, ¯m = 28.0 kg/km...
History, 22.07.2021 04:30
Social Studies, 22.07.2021 04:30
English, 22.07.2021 04:30
Mathematics, 22.07.2021 04:30