A hole of diameter D = 0.25 m is drilled through the center of a solid block of square cross section with w = 1 m on a side. The hole is drilled along the length, l = 2 m, of the block, which has a thermal conductivity of k = 150 W/m·K. The four outer surfaces are exposed to ambient air, with T[infinity],2 = 25°C and h2 = 4 W/m2·K, while hot oil flowing through the hole is characterized by T[infinity],1 = 330°C and h1 = 50 W/m2·K. Determine the corresponding heat rate and surface temperatures.

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?