At approximately what temperature (in Kelvin) would a specimen of an alloy have to be carburized for 1.2 h to produce the same diffusion result as at 750°C for 13 h? Assume that values for D0 and Qd are 3.4 × 10-5 m2/s and 156 kJ/mol, respectively.

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.