A subsurface exploration report shows that the average water content of a fine-grained soil in a proposed borrow area is 22% and that its average natural dry density is 82 pcf. This soil is to be placed in a compacted fill with a dry density specified at 96 pcf. How many cubic yards of borrow will be required to produce 50,000 yd3 of fill? What is the shrinkage factor for the borrow?

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

The higher the astm grain size number, the finer the gran is. a)-true b)-false