subject
Engineering, 21.02.2020 23:01 Tink2334

(11 pts) Cost of shipping: Write, compile, and test a C++ program that uses an if-else structure for problem 3.11 on page 108. Use the format specified earlier (initial block of comments with TCC logo, name, description, etc.) Display clear instructions so that the user understands the purpose of the program and what to enter. When the shipping cost is display, include the symbol ($). Run the program for the following 6 cases: 1 weight in each of the valid ranges (4 cases) 1 negative weight (display an appropriate message) 1 weight over 20 lb (not 50 as the text states) with the message indicated in the text Turn in a printout of the program and printouts of the 3 test cases.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
(11 pts) Cost of shipping: Write, compile, and test a C++ program that uses an if-else structure for...
Questions
question
Mathematics, 04.04.2020 04:33
question
Mathematics, 04.04.2020 04:34
question
Mathematics, 04.04.2020 04:34
question
Mathematics, 04.04.2020 04:34