subject
Engineering, 21.02.2020 18:56 CaraRose1887

Size (calculate height and diameter) a bioreactor (a pressure vessel) that can hold 2000L working liquid volume. Assum e 78% of the bioreactor total volume can be filled with liquid, with 22% of the bioreactor total volume left for gas holdup and headspace. Assume the optimal mass transfer and mixing design gives a vessel H/D ratio of 1.9. Model as a cylinder and neglect the volume/height of the vessel heads. (Hint: you don't actually have to look up anything about bioreactors! This should be a VERY simple calculation using only geometry...) Bioreactor height (neglecting heads) Bioreactor diameter: feet feet

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
You know the right answer?
Size (calculate height and diameter) a bioreactor (a pressure vessel) that can hold 2000L working li...
Questions
question
Mathematics, 29.10.2020 21:20
question
Mathematics, 29.10.2020 21:20
question
Mathematics, 29.10.2020 21:20