Engineering, 20.02.2020 20:28 avery8626
To prevent icing over wings of airplane, some heating panels are attached in the inner layers of the wing (as heat source). The heating power is required that the lowest temperature on the wing surface must exceed a critical value (below which icing may occur).
1) Establish a complete model for computational hydrodynamics and heat transfer if the flow is turbulent (using k-ε model); discuss the equation closure.
2) List all boundary conditions of (1), and, for numerical simulations of this problem, how to use wall functions?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 19:10
Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m
Answers: 1
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
You know the right answer?
To prevent icing over wings of airplane, some heating panels are attached in the inner layers of the...
Questions
Chemistry, 18.01.2021 14:00
Computers and Technology, 18.01.2021 14:00
Social Studies, 18.01.2021 14:00
English, 18.01.2021 14:00
Physics, 18.01.2021 14:00
