9 999
14. Look at the circuit shown in the figure above. With switch S, closed and the resistance value of R, and R, equal, meter M, has a current reading of 0.04 A. What will be
the current readings on meter M2 and meter Mg?
A. Meter My will read 0.02 A, and meter Ms will read 0.02 A.
OB. Meter M, and meter My will both read 0.04 A.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.