ADDI X9 X6 8
ADD X10 X6 XZR
STUR X10 [X9, 0]
LDUR X9, [ X9,0]
ADD X0, X9, X10
For each LEGv8 instruction show the value of the opcode (Op), source register (Rn), and target register (Rd or Rt) fields. For the I-type instructions, show the value of the immediate field, and for the R-type instructions, show the value of the second source register (Rm).

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.