subject
Engineering, 17.02.2020 22:42 JayceMeyers06

In this exercise, assume that we are considering enhanc ing a quad-core machine by adding encryption hardware to it. When computing encryption operations, it is 20 times faster than the normal mode of execution. We will define percentage of encryption as the percentage of time in the original that is spent performing encryption operations. The specialized hard- ware increases power consumption by 2%. a. [20] 〈 1.9> Draw a graph that plots the speedup as a percentage of the compu tation spent performing encryption. Label the y-axis "Net speedup" and label the x-axis "Percent encryption." ware result in a speedup of 2? encryption operations if a speedup of 2 is achievedb. [10<1.9> With what percentage of encryption will adding encryption hard- c. [10] <1.9> What percentage of time in the new execution will be spent on d. I 151 〈1.9〉 Suppose you have measured the percentage of encryption to be 50%. The hardware design group estimates it can speed up the encryption hard- ware even more with significant additional investment. You wonder whether adding a second unit in order to support parallel encrvption operations would be more useful. Imagine that in the original program, 90% of the encryption operations could be performed in parallel. What is the speedup of providing two or four encryption units, assuming that the parallelization allowed is limited to the number of encryption units?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
In this exercise, assume that we are considering enhanc ing a quad-core machine by adding encryption...
Questions
question
History, 02.02.2021 23:00
question
Mathematics, 02.02.2021 23:00
question
Mathematics, 02.02.2021 23:00
question
English, 02.02.2021 23:00
question
Spanish, 02.02.2021 23:00
question
Social Studies, 02.02.2021 23:00