An FCC iron-carbon alloy initially containing 0.20 wt% C is carburized at 1400K and in an atmosphere that gives a surface carbon concentration constant at 1.0 wt%. After how many hours does the concentration of carbon reach at 0.35 wt% at a position 5.0 mm below the surface?

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.