Engineering, 13.02.2020 20:13 davia97

The composite wall of an oven consists of three materials, two of which are of known thermal conductivity, kA = 25 W/m ⋅ K and kC = 60 W/m ⋅ K, and known thickness, LA = 0.40 m and LC = 0.20 m. The third material, B, which is sandwiched between materials A and C, is of known thickness, LB = 0.20 m, but unknown thermal conductivity kB. Under steady-state operating conditions, measurementsreveal an outer surface temperature of Ts, o =20ºC, an inner surface temperature of Ts, i= 600ºC, and an oven air temperature ofT¥=800ºC. The inside convection coefficienth is known to be 25 W/(m^2•K). What isthe value of kB?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

You know the right answer?

The composite wall of an oven consists of three materials, two of which are of known thermal conduct...

Questions