subject
Engineering, 13.02.2020 20:00 ajbrock1004

A delta connected load with each Z = 8 30degree ohms is supplied from a balanced three phase wye connected generator through lines having series impedance of 0.25 30degree ohms. The line-to-line voltage measured at the load is 208 volts (for the angle, please use load Vab as the reference, such that Vab = 208 0degree volts). Calculate the three load phase currents (magnitude and angle). Calculate the magnitude of the line-to-line voltage at the generator. Calculate the power factor at the generator (be sure to indicate leading or lagging).

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
A delta connected load with each Z = 8 30degree ohms is supplied from a balanced three phase wye con...
Questions
question
Mathematics, 14.08.2020 18:01