subject
Engineering, 13.02.2020 18:59 rcetrangolo

A pump at point A in a water delivery system produces 200 ft of head at a flow of 1000 gpm. It delivers water to a point B from a reservoir. If the head loss between point A and B is 20 feet, what is the pressure at point B in psi and kPa if B is at the same elevation as the water surface of the reservoir from which the pump is withdrawing water? (Ans: pB = 78.0 psi or 537.93 kPa)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
A pump at point A in a water delivery system produces 200 ft of head at a flow of 1000 gpm. It deliv...
Questions