A square silicon chip (k = 152 W/m·K) is of width 7 mm on a side and of thickness 3 mm. The chip is mounted in a substrate such that its side and back surfaces are insulated, while the front surface is exposed to a coolant. If 6 W are being dissipated in circuits mounted to the back surface of the chip, what is the steady-state temperature difference between the back and front surfaces?

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.